Linco P2

Best of All Linco Machines for External Thread Cutting. The Lanco P2 model, a Pillar Type, Heavier, More capacity variant, is ideal for enduring Most heavy workloads such as Scaffolding Threading and is beginner-friendly with added durability. Cromed Soild Pillars with brass Bushings. With or without a LeadScrew, and three size options (40mm, 63mm, 75mm dia), the thread length is customizable to meet your specific needs

Get Quote

Spares

Linco B72 (2).pdf

Different Variants

Linco P2D40

This variant of the machine has a threading capacity of 10 to 40mm diameter and a thread length of 500mm, which can be increased if necessary.

Linco P2D63

This variant of the machine has a threading capacity of 15 to 63mm diameter and a thread length of 500mm, which can be increased if necessary.

Linco P2D75

"This variant of the machine has a threading capacity of 15 to 75mm diameter and a thread length of 500mm, which can be increased if necessary.

Linco P2D100S

This variant of the machine features a Special DieHead Holder that can thread up to 100mm diameter but only 40mm long. However, it can still thread up to 500mm on a 63mm diameter.

Why US ?

Manual Handle

Manual Handle can be in case of emergency.

Increased Gear Width

Wide Gears (50MM) Provide more life as increase in contact area

Helical Gears

Helical Gears Last Longer than spur and are Quiet.

Chucknut over Bush

Check Nuts do not come loose on their own and can be used to compensate for wear

Better Pillar Support

Better Support for pillars Decrease the vibrations.

Two-Piece Gear System

With a two-piece gear system, Only one gear can be replaced instead of both gears and bushing

Better Gear shift Mechanism

This Design is more durable than other designs which can have problems.

Better Pillar Support (Front)

Better Support for pillars Decrease the vibrations.

1000023738_4e73a11e5c6accacd7bad8c6a1ac77fe-7_11_2024, 4_42_46 PM.jpg

Pin Instead of Bolt

Specialized Pins can last much longer than bolts due to large shear diameter

1000023737_58e965d8b6b23f4a9f7aac52dd753641-7_11_2024, 4_42_47 PM.jpg

Pin and Block Design

By Using Block the size can be Increased which in turn increases life of Pin.

Customization Options

Leadscrew Nut (IF NEEDED)

Leadscrews are crucial for providing precise slide feed, ensuring a superior finish and true thread form, especially for coarse and fine threads. Leadscrews are essential regardless of the thread type in applications such as PVC pipes. The type of Leadscrew chosen can have a significant impact on production efficiency and the lifespan of the screw and nut

Half-Nut

Half-nut design is typically used where automatic Disengagement of the Nut is needed in a Machine Like a Fork, PVC Threading, or Fine Threading Process. Can have low cycle time than split-nut design cycle time

Split-Nut

Split-Nut Design is used in the course Threading process. It provides more life but has a downside compared to Half-Nut as it has to be manually disengaged. It can also increase the Cycle Time

Vice Type

Tailoring work holding to the specific task is crucial. For items like forks or PVC pipes, specialized vice jaws are recommended, while hex nipples or right-angle pipes call for a different, dedicated approach to secure them effectively. Right type of vice will impact the life of Vice.

Pillar-Type

This type of Vice is mostly used in Machines of Bigger Sizes Like 63,77,100,150mm. It has more life than the normal vice but, at the expense of ease of Use and Price.

Normal Vice

This type of Vice is widely used in Machines of Size 25,40,50,63MM. It is a Self-Centering type of vice with options of Loading the Workpiece from Above which is not possible In Pillar Type

Pictures And Specifications

View More Machines

KS Bansal Machine Tools

GST :- 03AFUPB1978H1ZB