Heavy Duty Lanco (7)-Photoroom (2)_edited.jpg

Linco B54

Ultimate Solution for External Thread Cutting. The Lanco Heavy-Duty model, a robust variant, is ideal for enduring heavy workloads such as TMT Bar Threading and is beginner-friendly with added durability. With or without a LeadScrew, and three size options (25mm, 40mm, 50mm dia), the thread length is customizable to meet your specific needs

Get Quote

Spares

Linco B54 Borcher

Different Variants

Linco B54D25

This variant of the machine has a threading capacity of 6 to 25mm diameter and a thread length of 375mm, which can be increased if necessary.

Linco B54D40

This variant of the machine has a threading capacity of 10 to 40mm diameter and a thread length of 375mm, which can be increased if necessary.

Linco B54D50

Refined statement with addition: "This variant of the machine has a threading capacity of 10 to 50mm diameter and a thread length of 375mm, which can be increased if necessary.

Linco B54D70S

This variant of the machine features a Special DieHead Holder that can thread up to 70mm diameter but only 40mm long. However, it can still thread up to 375mm on a 50mm diameter.

Why US ?

Enhanced Gib Design

Angled Gib Provides More contact area to Bed ,Hence longer life

Increased Gear Width

Wide Gears Provide more life as increase in contact area

Helical Gears

Helical Gears Last Longer than spur and are Quiet.

Chucknut over Bush

Check Nuts do not come loose on their own and can be used to compensate for wear

Extended Shaft Length

Full-Length Shafts can increase the bearing and Gear life due to better Rigidity

Two-Piece Gear System

With a two-piece gear system, Only one gear can be replaced instead of both gears and bushing

Better Gear shift Mechanism

This Design is more durable than other designs which can have problems.

Ease of Maintenance

Due to the nature of this mechanism being in an accessible location, it is easier to maintain.

1000023738_4e73a11e5c6accacd7bad8c6a1ac77fe-7_11_2024, 4_42_46 PM.jpg

Pin Instead of Bolt

Specialized Pins can last much longer than bolts due to large shear diameter

1000023737_58e965d8b6b23f4a9f7aac52dd753641-7_11_2024, 4_42_47 PM.jpg

Pin and Block Design

By Using Block the size can be Increased which in turn increases life of Pin.

Customization Options

Leadscrew Nut (IF NEEDED)

Leadscrews are crucial for providing precise slide feed, ensuring a superior finish and true thread form, especially for coarse and fine threads. Leadscrews are essential regardless of the thread type in applications such as PVC pipes. The type of Leadscrew chosen can have a significant impact on production efficiency and the lifespan of the screw and nut

Half-Nut

Half-nut design is typically used where automatic Disengagement of the Nut is needed in a Machine Like a Fork, PVC Threading, or Fine Threading Process. Can have low cycle time than split-nut design cycle time

Split-Nut

Split-Nut Design is used in the course Threading process. It provides more life but has a downside compared to Half-Nut as it has to be manually disengaged. It can also increase the Cycle Time

Vice Type

Tailoring work holding to the specific task is crucial. For items like forks or PVC pipes, specialized vice jaws are recommended, while hex nipples or right-angle pipes call for a different, dedicated approach to secure them effectively. Right type of vice will impact the life of Vice.

Pillar-Type

This type of Vice is mostly used in Machines of Bigger Sizes Like 63,77,100,150mm. It has more life than the normal vice but, at the expense of ease of Use and Price.

Normal Vice

This type of Vice is widely used in Machines of Size 25,40,50,63MM. It is a Self-Centering type of vice with options of Loading the Workpiece from Above which is not possible In Pillar Type